The Way to Refinish Hardwood Floors Obviously
Refinishing hardwood flooring can prove an procedure, if done correctly but it is far more affordable than replacing the timber, and may restore your floor to its original, natural shine. You must use natural alternatives to find the job finished, if you want avoid destructive and harmful chemicals during the procedure.
Clear out the room and clean your hardwood floor with a mop and a solution of 10 parts water to one part vinegar. White vinegar is a safe, natural solution to chemical-based cleaners, but it is highly acidic, so be certain you dilute it. Hand-sand that the perimeter of the room with 180-grit sandpaper and a sanding block. Try to sand up to six inches outside the bottom board. The regions can smooth out that a buffer can’t reach.
Attach into a floor buffer and a put on a dust mask. You can rent a floor buffer from some home improvement stores if you do not have access to one. Move the buffer throughout the room from the direction of the wood grain, moving from side to side. Maintain the buffer in movement while it is on. Wait about 15 minutes and vacuum or sweep the floor to remove the powder left by the finish.
Choosing Your Finish
While searching for hardwood floor finishes, you may notice that the majority of finishes contain other chemicals and petroleum. If you shop around it is possible to find natural oils that work as eco friendly alternatives. Try a natural oil like jojoba oil, tung oil or Jojoba oil, all which provide an excellent finish without endangering the environment or your health. If you are interested in finding a color finish, or would rather have a commercial finish, start looking for a finishing wax derived from renewable oils and waxes.
Implementing Your Finish
Apply the finish to the perimeter of the room along the baseboards with a small paintbrush. With the perimeter coated, you are able to begin applying the oil. Pour a field of oil across the wood’s grain and work the finish into the floor with a paint roller, moving with all the grain and then across it. Continue distributing the oil. Then add oil. Until your floor is coated, Proceed and add another coat after three hours. Wait 1 week before returning furniture.