How to Antique a Brass Light Fixture

Light fixtures aren’t complimentary to the decor of a room and exist in lots of homes. A procedure that is a simple exists to antique the brass area to produce a fixture that is light having a completely different look. The antiquing method that was same could be applied to any brass product, enabling coordination of brass decorations inside the room. Prior to starting the task, the brass light fixture has to be eliminated. It’s important to to show the breaker off before you take it off to the circuit that feeds the fixture.

Clean the the top of fixture with water and soap. Remove particles from the suggestion of a round toothpick or ornate style function using a cotton swab. Allow the brass light fixture to air dry 15 minutes.

The whole area of the brass light fixture using a cotton ball saturated with rubbing alcohol. The alcohol eliminates skin oil and smoke residue, offering an area that is better for the spray-paint to to stick to to.

Sand the whole area of the light fixture lightly to scuff up the the final. Wipe the dust in the surface using a lint-free fabric.

Cut a big trash bag along the bottom as well as one side-seam. Open the trash bag and protect a work location that is flat in a well- secure and ventilated location to spraypaint, away from any pilot lights like a garage or basement, or outside.

Place the brass light fixture in the middle of the plastic.

Open the can of spraypaint and shake for 60 seconds. Turn the nozzle to point straight in the brass light fixture. Therefore the nozzle is around 6″ in the surface position the spray-paint. Apply a coat of spray-paint on the whole area of the fixture. Move the fixture as required to achieve all sides. Allow the spray-paint to dry for 1 5 minutes. Repeat the procedure to get a complete of two coats.

Lightly sand the spraypainted surface to expose a few of the brass surface. Sand as significantly or as tiny as wished to to generate the look that was required. Allow the spraypaint to stay static in in the information on the layout work.

Wipe the the top of mild fixture to eliminate all sanding dirt.

Three to five coats of acrylic spray sealer. Allow each coat to dry 1 5 minutes between program.

See related