Issues With Epoxy Pool Paint

Turquoise or aquamarine painted pools offer the illusion of a tropical oasis. But when the epoxy paint begins to peel, bubble or crack, there’s trouble paradise. While epoxy paint is the most durable kind of pool paint, even if the pool is badly prepared or the paint is not applied well, problems can happen.

Preparing for Epoxy

Epoxy paints form a tough, water- and also chemical-resistant finish, making them a durable paint choice for swimming pools Correctly applied, epoxy paint can last seven to ten decades. But even with recently painted pools, problems with epoxy paint can stem from improper preparation of the surface to be painted. Remove loose paint and dirt from the pool first by water-blasting the pool walls and floor. Surfaces which were formerly painted with epoxy as well as unpainted fiberglass will need to get abraded with sandpaper to help the epoxy paint adhere. Cleaning the pool with a trisodium phosphate solution farther removes oil and dirt. The pool must be completely dry before it’s painted.

Fading Away

The vibrant Caribbean blue of a pool’s walls can fade after several years of exposure to harsh pool chemicals and glowing sunlight. If the pool paint has become dull, but is intact, a light acid wash can clean off dirt which makes the paint appear faded.

Speaking about Chalking

As time passes, paint can break down, releasing tiny particles into the pool water which can make it and also the pool surfaces seem dull and hazy. This deterioration is known as chalking because like chalk from a chalkboard, the deposits rubs off pool walls and floors and onto swimmers. Chalking can be avoided by maintaining the pool’s alkalinity in the ideal assortment of 150 to 200 parts per million. Low alkalinity causes pool paint to chalk. Use a compound pool shock which is not too harsh, like lithium or di-chloro.

Peeling Is not Appealing

Pool paint can peel and blister as a result of improper preparation of the pool’s surfaces. If the pool has not been washed and dried before painting, blistering can occur. These problems can also happen if the pool is painted too thickly or the surfaces to be painted are hot. Spots which have blistered could be repainted without undermining the entire pool.

See related