Sanding for Wall Texture
Before applying texture into a drywall finish, the surface ought to be sanded. The smoother the finish on the drywall compound as the sand is applied, the easier and faster the sanding task will be. Use a hand sander or a handheld rotary tool with a sanding disc accessory used with a light touch when sanding joint compound in your walls.
Before sanding, any drywall compound used in corners, joints or dents in walls have to be completely dry. Standard drywall mud may take weeks to dry thoroughly, particularly in holes or dents where there’s a thick layer. Allow the material dry thoroughly before sanding, or it will require a repeat of the job. Place a fan in an open window to accelerate the procedure.
When the chemical is completely dry, it is ready for sanding. The objective of sanding would be to smooth the surface completely in preparation for texturing. Utilize a long-handled hand pole-sander having an 80- or 120-grit sandpaper specifically designed for sanding drywall after completing the task by hand.
Some people today prefer having a handheld rotary tool for faster sanding and greater control, particularly on small sections requiring sanding. These stains take much longer using a hand sander, so with a rotary tool rates the occupation.
After sanding, there might be gouges and scrapes in the finish, particularly if the original mudding job was not done well. These gouges need to be filled in before texturing. Fill and smooth themthen let them dry. Sand again following the repairs are dried. Sanding joint compound creates a great deal of dust, so keep windows shut, put on a mask and goggles, and attempt to include the dust into the area by hanging vinyl in any openings or doorways.