Troubleshooting a Kenmore Washing Machine Whose Spin Cycle Is Not Working
Kenmore makes washing machine in a variety of models, including top- and also front-loaders and high-efficiency units that save on energy costs and water consumption. But when your washer isn’t working correctly, the loads may quickly stack up. If your washing machine is experiencing a problem with its spin cycle, your laundry will still be soaking wet once you take it outside. Several problems can cause the spin cycle to fail to work, but it is possible to troubleshoot yourself without undermining expert aid.
Check Spin Speed
Your Kenmore washer automatically chooses a spin rate based on the cycle that you choose, but you can change the preset rates if needed. Heavy, bulky things can slow down the spin cycle if the chosen speed isn’t high enough. If you are washing a hefty load, then consult your owner’s manual to pick out a cycle using a medium to high spin rate to ensure that the cycle closes correctly. To change a preset rate setting, select a cycle and apply the Kenmore’s Spin Speed button to manually adjust the spin rate. Keep in mind that higher spin rates can cause more wrinkling in completed loads.
Assess for Jammed Basket
Your washer can neglect to spin if the clothing basket becomes jammed since small things are caught between the tub. If a clothing item, such as a sock, has gotten trapped in the gap, carefully untangle the article and remove it. For smaller things, you might have to use your fingers to achieve under the basket. To prevent the problem, empty the pockets of pants, shorts, jackets, shirts and other clothing before putting them in the washer. Utilize a garment bag to store smaller things from getting trapped beneath the basket.
Your washer might not spin due to various common loading issues. An overloaded washer might become tightly packaged, which can stop the basket from spinning correctly. Eliminate a few things and restart the cycle. A washer might have trouble spinning if a load is too small, also. Insert a couple of similar things to the basket. In some cases, the load might be the right size but not correctly balanced. Rearrange the moist clothing so it’s spread out evenly throughout the basket to permit for proper spinning.
Utilize Proper Detergent
If there are too many suds on your washer, spinning can be slowed or stopped. In most cases, excessive sudsing occurs since you use a lot of detergent or you have a high-efficiency model and also utilize a non-HE detergent. Always read the detergent’s label to ascertain the proper amount for the load, and read your owner’s manual to make certain whether your version of washer necessitates HE detergent. To remove excessive suds from your washer, run an additional cycle and rinse without inserting any more detergent.