The fabric softener dispenser in a washing machine provides”set it and forget it” convenience for laundry day, eliminating the need to wait till just the right moment in order to add softener to the wash load. The more the dispenser is used, the greater the chances it will clog. Some of the fabric softener says , even after the rinse cycle, eventually clogging the dispenser because the liquid melts and cakes in place. Cleaning the dispenser makes it useful once more; determined by the machine version, it may be removable or fixed in place.

Cleaning Removable Dispensers

Eliminate the fabric softener dispenser in the washing machine by simply pressing a release lever, squeezing tabs or simply lifting it out; the particular method varies by make and model.

Scrub the dispenser under tap water.

Set in a wash or skillet tub. Add enough hot water. Mix in a tbsp or two of liquid laundry soap, swirling it. Allow the dispenser to soak for 10 minutes or so, touching the fabric softener buildup to find out whether it’s loosened. If not, soak the dispenser for a second 20 minutes.

Scrub the dispenser under water to remove the fabric softener. In the event the spout does not rinse away on its own, wipe it. Dry the dispenser with a cloth, then place it back into position in the machine.

Cleaning Unremovable Dispensers

Pour water into the dispenser. Add a couple drops of liquid detergent and allow the solution to sit for 10 to 20 minutes.

Flush the dispenser together with water that is warm. If fabric softener is visible inside the toaster, wash it up with a soft fabric and rinse again.

Run the washing machine through a rinse cycle several times, selecting warm water to the rinse. If warm isn’t a rinse option, pour warm water blended with a splash of laundry detergent into the toaster involving rinses to help loosen the buildup.

See related